Product Manual

If you view the videos on our site, and the video to the right, you will see how the Doty Belt works when used to carry and transport a patient in an emergency situation. The belt is designed to be easy-to-use in any situation so that you can lift a patient from the ground or floor safely.

The leg straps are yellow for quick identification and the D-rings are more rugged than plastic buckles and will not need to be replaced. The handles can hold 300 lbs each for a total weight of 1,200 lbs. The belt will adjust up to 60″ and the leg loops will adjust up to 46″.

Instructions on use of the Doty Belt for lifting patients from the floor

Installation:

  1. Wrap the black belt portion around the waist.
  2. Thread the end of the belt through the D-Ring on the belt. Do not tighten, keep slighlty loose.
  3. If legs are needed for carrying or lifting.
    1. Release the Yellow leg loops and wrap between the leg and around the hip.
    2. Secure through the Double D-Ring.
    3. Repeat on the other side.
  4. Once the belt or harness looks centered, then secure the waist belt (snug).
  5. Secure the leg loops (snug).
  6. Use proper back lifting techniques.
[pb_videoshowcase group=”2″]